Archetype New member Apr 20, 2023 6 0 1 May 18, 2023 #1 Working on tuning my retractions for my HE20 paired with an Orbiter v2. Was wondering if anyone is running the same setup and the settings they are using?
Working on tuning my retractions for my HE20 paired with an Orbiter v2. Was wondering if anyone is running the same setup and the settings they are using?
Archetype New member Apr 20, 2023 6 0 1 Sep 16, 2023 #2 Just to update this for anyone who may need this info later. Standard retraction distance I use is 1mm for abs and pla. For polycarbonate and nylon blends I use 1.2mm to 1.4mm
Just to update this for anyone who may need this info later. Standard retraction distance I use is 1mm for abs and pla. For polycarbonate and nylon blends I use 1.2mm to 1.4mm
Advanced Takoto Ken New member Jul 19, 2023 1 1 0 Melbourne, Australia Oct 9, 2023 #3 As a "rule of thumb", I find anything from 1.5 - 2.5 times the Nozzle diameter works good if the heats are right. Typical speed is 25-45mm/s. Reactions: Archetype
As a "rule of thumb", I find anything from 1.5 - 2.5 times the Nozzle diameter works good if the heats are right. Typical speed is 25-45mm/s.
Archetype New member Apr 20, 2023 6 0 1 Oct 9, 2023 #4 Advanced Takoto Ken said: As a "rule of thumb", I find anything from 1.5 - 2.5 times the Nozzle diameter works good if the heats are right. Typical speed is 25-45mm/s. Click to expand... Thank you Ken!
Advanced Takoto Ken said: As a "rule of thumb", I find anything from 1.5 - 2.5 times the Nozzle diameter works good if the heats are right. Typical speed is 25-45mm/s. Click to expand... Thank you Ken!
